In my last post I posed a question about correct flags for my Russian Civil War Izhevsk Rifle Division, having drawn a blank on useful references.
I also posted my question on the Lead Adventure Forum where forum members Mark Plant (of the splendid Pygmy Wars website) and Cuprum (of Studio Siberia) both offered some excellent suggestions and advice. Cheers guys! This included a link to www.kolchakiya.ru. The site is all in Russian, but fairly easy to navigate with the assistance of Google Translate. Here I found a mine of useful information on the histories, uniforms and flags of Admiral Kolchak's White forces in Siberia, including the Izhevsk Rifle Division.
The site describes several banners of the Izhevsk Rifle Division, including two St. George banners. According to the accompanying text only one of these, the "Battle flag of Izhevsk Division", was actually presented to the unit - so this is the one I chose:
 |
'Battle
flag of Izhevsk Division'. (source: www.kolchakiya.ru)
|
 |
'Battle
flag of Izhevsk Division'. Photo from the
archives of the Museum of Russian Culture in San Francisco. Published in the
book Efimov AG Izhevtsy and Votkinsky. The fight against the
Bolsheviks1918=1920. M., 2008 (source: www.kolchakiya.ru)
|
The flag is described as a rectangular panel, divided into two equal parts. The left-hand part is white with a diagonal cross of St. George ribbon. The dates 7/VIII 1918 and 9/IX 1919 in gold are placed in the upper and lower quadrants respectively. The right part is White-Red-Blue (the colours of the Russian flag) with the letters "Izh" in gold on the centre blue band.
Unfortunately, no dimensions are quoted so I resorted to making my version 'wargames scale', i.e. large enough to look good on the wargames table. Using the two pictures for reference, I tinkered around in Photoshop until I had something I was happy with. As there is no description of the reverse side of the flag, I simply used the same design for both sides. I did ponder a bit about the colour of the St. George ribbon. These are usually black and orange stripes, but those in the picture are more of a golden yellow. Even allowing for fading, I doubt the original colour was far from what can be seen in the photo. Perhaps orange cloth was hard to come by! Anyway, here's what I came up with:
After printing out on plain white paper, I carefully cut out the flag and applied a liberal coat of PVA glue to the reverse. After allowing a few minutes for the glue to soak into the paper, I folded the two halves of the flag together, wrapping the centre portion around a steel rod for the banner pole. The PVA made the paper quite wet and easy to shape into the desired folds, but once dry the shape is set and quite strong; good enough for the rigours of the games table at least. All that remained was to 'present' the banner to its unit by adding it to the standard bearer.
Ready for action!
